בדיקה

search
Free Shipping
On Purchases over 20$
search


How To Apply Heat Transfers

How to Apply Heat Transfers

You will need :

- Heat transfer applique
- Heated Iron
- Flat Basis
- Cover On Sheet

1. First iron the shirt and cut excess material around the image you want to transfer. Pay attention not to cut the applique!

2. Remove the white paper from the applique.

3. Place the applique with the vinyl, while the applique faces you and the sticky part is attached to the fabric.

4. Place the additional layer on top of the applique and set your iron on the highest setting.

5. Press the heated iron for 15-30 seconds and wait for the applique to cool down, while pressing the stones using the
additional layer to ensure all stones have adhere to garment.

6. Gently remove the clear layer from your applique and and you're DONE!

Important Information:

DO NOT Iron On: imitation leather, leather, oil treated fabrics, waterproof coated fabrics (silicone), and rubberized materials.

How to Apply Heat Transfer Patches

You will need :

- Heat transfer patch
- Heated Iron
- Flat Basis
- Cover On Cloth

1. First choose your Patch HERE

2. Place the patch on your garment where you want to apply it. The glue side of the patch must be
facing the garment itself.

3. Heat your domestic iron and place it on the top of the patch. For more delicate garments - we suggest
you to use an additional cloth between the iron and the patch/garment.

4. Iron over gently and wait between 10-15 seconds. Remove the iron and check if the patch is attched
fully to your garment. Let it cool down for a few seconds and you're DONE!

Important Information:

DO NOT Iron On: imitation leather, leather, oil treated fabrics, waterproof coated fabrics (silicone), and rubberized materials.

How to Apply Iron On Studs

You will need :

- Iron On Studs
- Heated Iron
- Flat Basis
- Cover On Cloth

1. First choose your favorite studs HERE

2. Place the studs on your garment where you want to apply it. The glue side of the studs must face the garment itself.

3. Heat your domestic iron and place it on the top of the studs. For more delicate garments - we suggest
you to use an additional cloth between the iron and the patch/garment. You can use fumes also.

4. Iron over gently and wait between 10-15 seconds. Remove the iron and check if the all the studs attached fully to your garment. Let it cool down for a few seconds and you're DONE!

Important Information:

DO NOT Iron On: imitation leather, leather, oil treated fabrics, waterproof coated fabrics (silicone), and rubberized materials.